Skip to main content
All CollectionsMarketing & EngagementConnecting Your Domain
How to connect a Wix domain to send emails through Engage
How to connect a Wix domain to send emails through Engage

Step-by-step directions for connecting your Wix domain to send outbound emails through Givebutter

Sunny avatar
Written by Sunny
Updated over a week ago

Before you start πŸ“

You'll need the following before you begin setup:

  • The name of your DNS provider, and login information for your DNS account

  • A real email address at your domain (an email address that ends in your website address, ie. [email protected])

Engage is automatically activated for verified nonprofit accounts. Accounts that are not verified will need to first Request Access on the Engage tab.

Who is my DNS provider? πŸ€”

If you're not sure who your DNS provider is, you can check at https://mxtoolbox.com/DNSLookup.aspx

  • Type your domain into the empty field

  • Click DNS Lookup

  • Your DNS provider will be displayed at the bottom

DNS lookup example

Generate DNS records ✨

CNAME and TXT are the two DNS records you will be adding to your DNS provider, but before you add them, you need to generate them in Givebutter.

  • On the Engage tab in your Givebutter dashboard, click on Set up domain.

an arrow points to set up domain
  • Click Add Domain and then select Use your domain and email address.

  • Enter your domain name, add a reply-to email, and click Add Domain. This will generate new TXT and CNAME values. Close out of this screen. There will be red error messages: Not connected and Not active. Don't worry, this is expected!

domain not connected
  • Keep this tab open; you'll need it in a minute.

Add records to Wix βž•

Next, you'll be adding these newly created CNAME and TXT records to Wix.

  • Make sure to leave your Givebutter tab open. In a new tab, login to your Wix account.

  • Click on the drop-down arrow in the top right corner, then click on Domains.

domains in Wix
  • Find the domain you want to connect to Givebutter. Click the three dots (...) on the far right, and then click Manage DNS records.

manage DNS records in Wix
  • Switch back to your Givebutter tab (make sure you keep your Wix tab open too!) and click on the copy icon in the TXT Name field.

copy icon

Add TXT to Wix

  • After copying the TXT Name from Givebutter, return to your Wix tab.

  • Under the TXT section, click + Add Record.

  • Paste your copied value into the Host Name field.

  • Return to your Givebutter tab and copy the TXT Value field.

  • Paste that information in the Value field of Wix.

  • Leave TTL as 1 Hour.

  • Click Save.

Add CNAME to Wix

  • Switch back to your Givebutter tab (make sure you keep your Wix tab open too!) and click on the copy icon in the CNAME Name field to copy it to your clipboard.

  • Return to your Wix tab.

  • Under the CNAME (Aliases) section, click + Add Record.

  • Paste your copied value into the Host Name field.

  • Return to your Givebutter tab and copy the CNAME Value field.

  • Paste that information in the CNAME Value field of Wix

    • Make sure to remove the final "." on the CName value you paste in, or you will get an error when you try to save.

  • Leave TTL as 1 Hour.

  • Click Save.

Run Verification πŸ”„

  • Return to Givebutter and click the Refresh Status button. Verification can take up to 48 hours. Our system will automatically retry your verification for 72 hours.

  • Continue on to the next steps while you wait for verification. As long as they are also completed, you'll be able to send emails as soon as the green verified badges appear.

verified badges

Completing setup βœ…

There are just a few remaining steps to complete once you've successfully connected your domain.

Add email senders βœ‰οΈ

  • In the Engage tab, click on Settings under the Engage header, then select Email Senders.

  • Click + Add new.

  • Enter the sender name and email address you want to connect and click Submit.

    • Emails must exist on the domain you have connected in order to be used for Engage.

  • A verification email will be sent to the email address you provided. Click verify email.

  • Your sender email should now show as Verified.

Your sender email address must be verified before you'll be able to send outbound emails using Engage.

verified email address

Branding 🎨

  • In the Engage tab, click on Settings under the Engage header, then select Branding.

  • Upload a logo – recommended dimensions 300px x 300 px, max size: 5MB

    • A logo is required to be uploaded before you can send outbound emails. If you prefer not to display a logo, you can upload a white square of the same dimensions.

  • Choose a brand color.

  • Add an email logo hyperlink.

See our guide on customizing your Engage email branding, which includes some more tips and tricks.

Address 🏠

  • In the Engage tab, click on Settings under the Engage header, then select Addresses.

  • Enter your address information.

  • Click Submit.

Congratulations! You're now ready to compose and send your first email via Engage! πŸŽ‰


Related content πŸ“š

Did this answer your question?